[jonbill]

sorry, yes, the tooth log is empty - megalogviewer is showing me the last good log I viewed
capture a data log rather than a tooth log, which is under "data logging" in the main menu in Tunerstudio.

[malibuguy79]

i did but its not allowing me to attach it for some reason

[jonbill]

Yeah, doesn't like the extension.
Best approach is to zip the log and the tune used together and upload that.

[malibuguy79]

Talking to Chris today, he says I need to clip pins 1 and 8. So I guess here goes nothing

[malibuguy79]

clipped the pins. no change. no rpm signal.

[malibuguy79]

Update!
I am an idiot. Along with some other things...the main issue was I had the new HallEffect sensor grounded RPM- instead of normal ground.
The car kinda starts now. Just waiting for the battery to recharge (small agm battery).
So the combination of that, along with a daughterboard mod and of course associated jumpers. It at least tries to run.

[jonbill]

[malibuguy79]

Had it running fully earlier, so yes great sucess!

Wiring is back out of it to fix it properly and wrap it up