For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By LPGo
#62226
No its the 6 pin connector at the left slck, mosi, miso, vcc, gnd and reset, is used to get a hex file loaded, so you can also load the bootloader with it.
By LPGo
#62287
So this evening I added some more features to my board. But first i opened a Github account and posted the schematics sofar.


https://github.com/Efi-Geo/Spark-Squirt ... -04-03.pdf

Please take a look and shoot. It is comming along nicely, Still have some space left over where I want to put the onboard Wideband chip.

Again I like the blitzboard.


Some pictures of today:

HHmm I can"t upload pictures... w.t.f.
By LPG2CV
#62288
Geo, there has been a forum software update today, due to spamming. He is still sorting the settings out :)
Edit
I can edit now though :D

you could set 'skip revolutions' to 3, then it wou[…]

Hi, I am trying to assign Signed values to the x-a[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?