For any discussion not specifically related to your project
jonbill wrote: Sat Apr 01, 2023 6:20 pm If those odd programmable outputs have appeared on their own, I'd run an eeprom-clear before reloading the tune.
Re piston holes: I mean mechanical failures happen when they happen, and with a new built engine I'd be thinking about that too.
If eeprom-clear and reloading the tune dont fix it, I'd compression test all 4.
okay, can u explain how i would do that?
jonbill wrote: Sat Apr 01, 2023 6:50 pm Eeprom-clear? Its a "firmware" you can download and install with speedyloader. It zeros out all the eeprom.
It runs when the mega boots, so after you've loaded it and rebooted the mega, reload the firmware and your tune.

Okay thank you very much. I hope this will fix it :)
TBI injector resistors

Yep, kinda weird, but really practical, I like it[…]

I have doubts about it, I program 8000 rpm for the[…]

After perusing the source code, it looks like ever[…]

of the VR conditioner output right? And can you[…]

Still can't find what you're looking for?