LPG2CV wrote: ↑Sat Apr 01, 2023 9:04 pm Try a look here.That's not an adaptor board but a complete stm32 replacement for a mega MCU board.
not sure how much it's tested, as developed for bmw's
porschenstein wrote: ↑Mon Apr 03, 2023 4:19 pm Thanks for all your replies. I looked at Dropbear, but they appear to still be recovering from the supply-chain disaster. Also note that the Teensy 3.5 has been discontinued - I ordered a 4.1 version to play with. My preference is for the STM32 - they're hard to beat in the cost/performance dept. The Teensy @ 600Mhz seems way beyond overkill...Josh was working on a t4.1 replacement for the dropbear which also replaced other devices it used that have also become unavailable.
Anyway, I'll stop rambling now. I'll take a look @ the BMW board. Did Tjeed make his design public?
I own a K24 Accord, and I would like to join the t[…]
Ok so the coil driver sits between the output of t[…]
I am looking at a distributor upgrade for a Vtec. […]
From alittle searching all I could find was that t[…]