Any questions you have before you begin buying, building and installing.
User avatar
By sardonicus
#61447
Does fuel timing require a trigger wheel of some kind or can that signal be gotten somewhere else? I am converting this bike from carbs to efi so there is no existing infrastructure for these signals and I am planning on initially only controlling fuel with the speeduino. I built a transistorized ignition module for this motor ages ago and it works just fine using the points as a simple switch. I might expand later to have the speeduino handle ignition too but for now just fuel. My plan at the moment is for each cylinder to have its own throttle body, and its own injector. If it matters this is a parallel twin, both pistons go up and down together.
Tach output and RPM sensor issues

By somewhat better I meant that before adding the […]

I saw this suggested on GitHub. I've used programm[…]

BMW E23 M30B28

Ignore my previous posts, I'm an idiot. Turns out […]

He's quite prolific with respect to video and elec[…]

Still can't find what you're looking for?