[PSIG]

Hello all! I can't find a good match for this 2P connector on a Pierburg fuel pump assembly. I know it should be easy. It appears nearly identical to a Bosch injector connector, but larger. Like a TE/AMP Junior Power Timer or certain Jetronic or Packard connectors — but larger. Perhpas a TE Std Timer, but I can find any. The terminal blades are about 6mm (0.25"), and the male housing measures about 23.6mm (0.93") wide (except lock tabs). Any good eyes out there? Ask any info you need. Thanks!

Pierburg_connector_1.jpg (92.14 KiB) Viewed 5101 times

Pierburg_connector_2.jpg (85.74 KiB) Viewed 5101 times

[PSIG]

Still leaning toward TE's Standard Power Timer, (SP Timer or SPT), but cannot find any to verify or buy - especially the wire terminals (contacts). Anyone have a US source, or any source at this point? Looking at the
• 881632-1 or 444075-1 for connector housing, and
• 927833-1 or 927833-2 for wire terminals as best-bets so far.
Thanks!

*PS, my VPN (required at work) is suddenly being blocked by a lot of sites, so my searching is crippled to an unknown extent.

[jonbill]

444075-1 and 927833-2 look like they're available at mouser uk.
happy to forward you some if that would help.

[PSIG]

Awesome! I'm waiting to see if they unblock my VPN so I can try here. If not or no other option, I'll PM you, and thanks for the offer!

[LPG2CV]

I think Mouser UK is in America Least ways, that's where my parts are despatched from when I order.