- Thu Dec 22, 2022 10:16 am
#60062
Hi! I have questions if you can answer. I want to make the mega 2560 work as an independent gearbox controller without a speduino. I downloaded the firmware, and the controller is now connected to tuner studio, but all analog inputs do not respond to + 5V power, GND, digital and there is no input, the output does not respond to anything, tuner studio devices do not respond. I'm testing on a table without a speduino, I only have one mega 2560 connected to a PC via USB, nothing else. How to make analog, digital inputs work so that they display the work in the tuner studio? Another question is how can I make it work with a megasquirt through a Can, I have an msp2515, but I'm not sure that the firmware of the box will work with the megasquirt Can protocol?
Attachments
Screenshot_2022-12-22-15-59-55-129_com.miui.videoplayer.jpg (543.65 KiB) Viewed 5130 times