Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any questions you have before you begin buying, building and installing.
By imoze
#58721
hi everyone, i'm new to speeduino and want to ask has someone ever used LSU ADV work with speeduino?
if it does what controller to use with ADV WBO2, and it is possible to build own cotroller like LSU 4.9?

thanks.
By LPG2CV
#58727
it's the only one I have ever bought, just the one . :D

I guess you need to consider where you are in the world, and what country you want to buy from?

if you want CAN, be aware not all speedy products support CAN.
User avatar
By JanKovalski
#58730
I also bought it. It does what it's supposed to. The big heater mosfet is whining pretty loud but I contacted the owner and he said it's normal.
Attachments
IMG_20220729_223118.jpg
IMG_20220729_223118.jpg (2.01 MiB) Viewed 1026 times
By JHolland
#58737
imoze wrote:
Wed Sep 28, 2022 10:04 am
hi everyone, i'm new to speeduino and want to ask has someone ever used LSU ADV work with speeduino?
if it does what controller to use with ADV WBO2, and it is possible to build own cotroller like LSU 4.9?
thanks.
I have a Spartan 3 ADV. Theoretically you could build your own controller but I have yet to see a full datasheet for the ADV openly available.
By imoze
#58787
thanks for reply, actually my sensor comes with the controller but the controller uses serial rather than analog 1v-5v and has its own software in windows. it works as a dataloger.

I think speeduino can't use WB controller based serial com

try to open the box this is what i got, stm32f and bosch 30615 chip
Attachments
IMG_0746.JPG
IMG_0746.JPG (3.81 MiB) Viewed 698 times
By Alfagta
#58794
JHolland wrote:
Tue Oct 04, 2022 2:32 pm
imoze wrote:
Tue Oct 04, 2022 12:50 pm
try to open the box this is what i got, stm32f and bosch 30615 chip
The 30615 is probably a counterfeit CJ135.
No, 30615 is CJ125.
I have never seen any aftermarket controller with CJ135
Cylinder Wiring question

speeduino fires its channels in the order 1,2,3,4.[…]

Hi, I'm looking at using a Speeduino for a small […]

PCB for BMW m52 engine

You can extend the data curve to find the correct[…]

These are hard to remember.

Still can't find what you're looking for?