Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
#58161
So being that its impossible to find a teensy 3.5 I figured I would try to make the stm32f407 to teensy adapter you have on github, but I was reviewing the board and I don't see any inner pins to go to the boards iat and clt, that and the pins that are addressed in the pcb file go to completely different pins
#58175
demolishionc4 wrote:
Wed Aug 17, 2022 4:43 pm
So I saw this before but I couldn't find any forums talking about it so I really didn't trust it. I guess I should of just rolled the dice and ordered some of those pcb instead
Well I have one and has been great for testing use I have used it. I also know many that are running their car with that.
  • 1
  • 20
  • 21
  • 22
  • 23
  • 24
WBO2 controller with LSU ADV

I also bought it. It does what it's supposed to. T[…]

Welcome! Read the Wiki lightly, just to get overa[…]

Couple of sites you could try for the connector: C[…]

Nissan CAS timing

Thanks for your help. Once I get everything in I a[…]

Still can't find what you're looking for?