For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
#58161
So being that its impossible to find a teensy 3.5 I figured I would try to make the stm32f407 to teensy adapter you have on github, but I was reviewing the board and I don't see any inner pins to go to the boards iat and clt, that and the pins that are addressed in the pcb file go to completely different pins
#58175
demolishionc4 wrote: Wed Aug 17, 2022 4:43 pm So I saw this before but I couldn't find any forums talking about it so I really didn't trust it. I guess I should of just rolled the dice and ordered some of those pcb instead
Well I have one and has been great for testing use I have used it. I also know many that are running their car with that.
#63773
JDMar23 wrote: Mon Jul 03, 2023 11:38 am
pazi88 wrote: Wed Aug 17, 2022 7:06 am Why don't you just put together STM32 based speeduino, instead of doing adapter: https://oshwlab.com/b.brazdziunas/scg-e ... _copy_copy
Which firmware its compaible with this board? And how to locate firmware for CY8C24223A without LCD? Thanks, i am newby in speeduino.
There is only one official speeduino firmware used for mega,teensy and stm32 MCU.
BUT as this board never had its pin config added to the firmware release you will need to do that yourself before uploading to the MCU.
  • 1
  • 21
  • 22
  • 23
  • 24
  • 25

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?