- Sun Jul 03, 2022 4:14 pm #57618
When I search for ST2 FPRs I get this thing that appears to fit into the sending unit. No real way for me to use that in my application.
01112800.jpg (79.87 KiB) Viewed 497 times
by the looks of it in this parts breakdown there is a snap ring (22) that retains your regulator. The function of the regulator would be exactly the same as a VW with the Vacuum Line being on/off "switch" being that it opens the regulator when manifold vacuum signal is present and closes to hold residual pressure on the top of the injector when the engine is off.https://ducatiparts.crosscountrycycle.n ... 003040.jpg
Hey guys, I have built a Rev2.2 version of this E[…]
… Here is my question: can I use speeduino[…]
Thanks everyone, I think 12 is probably going to b[…]
for a single cylinder engine, channel 1 is the p[…]