ca20e help

ca20e help#57588

By s12 - Fri Jul 01, 2022 3:08 am

- Fri Jul 01, 2022 3:08 am #57588

what pin is 12v power in to ecu

the arduino 2560 r3 has a power plug is it used

Re: ca20e help#57607

By dazq - Sat Jul 02, 2022 7:35 am

- Sat Jul 02, 2022 7:35 am #57607

s12 wrote: ↑Fri Jul 01, 2022 3:08 am what pin is 12v power in to ecu
the arduino 2560 r3 has a power plug is it used

Which board are you using ,they are all varied.

No the power plug on the mega is unused.

Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working

Re: ca20e help#57614

By s12 - Sun Jul 03, 2022 3:30 am

- Sun Jul 03, 2022 3:30 am #57614

ecu is 0.4.1

Attachments

ecu 1.jpg (61.54 KiB) Viewed 1804 times

Re: ca20e help#57615

By LPG2CV - Sun Jul 03, 2022 6:09 am

- Sun Jul 03, 2022 6:09 am #57615

the orange screw terminal, in the bottom left corner has 12v written next to it!

Mere Mortal

Re: ca20e help#57662

By s12 - Fri Jul 08, 2022 4:46 am

- Fri Jul 08, 2022 4:46 am #57662

hi lgp2vc

Thanks for your help, would you be able to help with a wiring diagram for a ca20e with this ecu?

ca20e help#57588

Re: ca20e help#57607

Re: ca20e help#57614

Attachments

Re: ca20e help#57615

Re: ca20e help#57662

Ignition Angle doubled?

1979 Chrysler Scorpion draw through carby conversion (4G54 + Garrett T3 + Stromberg CD175

BMW E23 M30B28

m52 pnp v2.2 board weird lag spikes while in boost.