Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
User avatar
By speeduino-v6
#57298
Hello, Im tryring to get a v6 60Degrees engine ignition to run on a speeduino 0.3.7. But im not getting any spark of my wasted spark coil. When i am testing te outputs of the speeduino it give 5Vdc and the wasted sparkt coil fire by turning the 5V off. Im using
only the original distributor with a 6-1 wheel that gives a 12v puls on rpm1 . When cranking the rpm goes up in tunerstudio.
The engine fuels is regulated with an carburator.

Wasted spark coil
Febi 078 905 104 a
jumper setting
jp1 5v
jp2 vr conditioner
jp3 vr conditioner
jp4 off
jp5 off
Attachments
(638.51 KiB) Downloaded 24 times
540HP NA 7L V12 3Seater

That looks like an interesting worm hole. I can't […]

I would like to get an eagle and swap in a stroked[…]

Oh man! I am getting consistent RPM! That's […]

PCB for BMW m52 engine

yes, I take your point. I'm sure pazi will clari[…]

Still can't find what you're looking for?