Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For discussion of Speeduino compatible boards designed / built by other members of the forum and for guidance around making such a board
By Julien Hilaire
#57490
Hi all,

what do you think about a speeduino's project in 2 pcb ?

I mean (based on an enclosure like DROPBEAR):
1 daughter pcb including all functions (8INJ, 8ING, IDLE, VVT, ...) + all filtering and modulation signals (CAM, CRANK, IAT, MAP, BARO, TPS, EGT, WBOx Ubat, IDLE) + AUTOMOTIVE CONNECTORS like DROPBEAR;
1 motherboard pcb with MCU but with standard numbers and peripherical position connectors to daughter board, 5v + BT or CAN signals, etc ...; with the ability to connect to various locations designed for MCU TEENSY3.X or TEENSY4.X or MEGA or ARDUINO PRO or STM32?

Isn't this a way to ensure that MCU availability won't be an issue?

Kind regards, Julien.
By LPG2CV
#57495
it requires 2 boards, so already more expensive to produce!

also, some are 5v and some are 3v and require amplification. :)

Not knocking it though :)
PCB for BMW m52 engine

I had a Speeduino MS41 REV3.0B made by JLC PCB a[…]

540HP NA 7L V12 3Seater

That looks like an interesting worm hole. I can't […]

I would like to get an eagle and swap in a stroked[…]

Oh man! I am getting consistent RPM! That's […]

Still can't find what you're looking for?