Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any discussion not specifically related to your project
By Tankki123
#57416
Hello, i have turbo bmw m50b25, it was non vanos which i retrofitted to vanos just some time ago.
It works fine when vanos is off but when i turn it on from 1000rpm to 4000rpm it makes a cut in just about 4000rpm when vanos is turning to off.
What can cause this?
It feels like same when boost cut kicks in but i checked and there is no limits which can cause this.
Attachments
IMG-20220614-WA0033.jpeg
IMG-20220614-WA0033.jpeg (266.22 KiB) Viewed 697 times

Thanks for the replies guys! I have done all sorts[…]

PCB for BMW m52 engine

I had a Speeduino MS41 REV3.0B made by JLC PCB a[…]

540HP NA 7L V12 3Seater

That looks like an interesting worm hole. I can't […]

I would like to get an eagle and swap in a stroked[…]

Still can't find what you're looking for?