Don't know. Sometimes gerbers from EasyEda do that. But even thought the preview doesn't work, the PCB's will come out fine. Just add the dimensions (118*155) by hand if it doesn't recognize it.
No code changes needed. It should work without any changes (if VSS is wired in the car), although I haven't verified it. VSS input pin is D3 and at least in upcoming FW release, you should be able to use default input pin. The VSS signal should come out of ABS unit also in case of fault.
Can't help with IAC. Your intake runner. Use the […]
After weeks of search. here is the result, it is[…]
Some just pull the linkage a little, so all butter[…]
Just a hint for your engine: The latest engine bui[…]