- Wed May 12, 2021 4:56 am
#50248
Hey Guy's,
I might be just to stupit to get it work, but I`m unable to get my Teensy 3.5 CAN Bus up and running.
Have designed a driver circuit using "MCP2551" see picture(only R100 and R102 are populated), but I can not get connected to speeduino for example via "FORScan" using ELM 327 adapter.
It connects to the ELM Adapter but will not connect to speeduino by saying "can not connect to car" see picture.
any help is highly appreciated!
Thanx,
// Transi
I might be just to stupit to get it work, but I`m unable to get my Teensy 3.5 CAN Bus up and running.
Have designed a driver circuit using "MCP2551" see picture(only R100 and R102 are populated), but I can not get connected to speeduino for example via "FORScan" using ELM 327 adapter.
It connects to the ELM Adapter but will not connect to speeduino by saying "can not connect to car" see picture.
any help is highly appreciated!
Thanx,
// Transi
Attachments
forscan.PNG (24.63 KiB) Viewed 6315 times
can_config.PNG (22.43 KiB) Viewed 6315 times
can_driver.PNG (22.35 KiB) Viewed 6315 times