- Wed May 12, 2021 10:49 am
#50267
Hello again all
It's been a while since my first Speeduino project, but I still have a spare 0.4 board here, and a cheap project car to play with.
It's powered by the Blacktop 4AGE 20V engine and currently completely stock. Is anyone running a speeduino on one of these? There seems to be very little info on this forum when I search.
Mainly want to know what the trigger wiring and settings are. I believe it's in the distributor, with a 24 tooth wheel and a cutout for a single "tooth" reading. If they are both VR sensors, can the official VR conditioner condition both triggers at the same time?
Cheers
Kelvin
It's been a while since my first Speeduino project, but I still have a spare 0.4 board here, and a cheap project car to play with.
It's powered by the Blacktop 4AGE 20V engine and currently completely stock. Is anyone running a speeduino on one of these? There seems to be very little info on this forum when I search.
Mainly want to know what the trigger wiring and settings are. I believe it's in the distributor, with a 24 tooth wheel and a cutout for a single "tooth" reading. If they are both VR sensors, can the official VR conditioner condition both triggers at the same time?
Cheers
Kelvin
1985 Rover SD1 Vanden Plas EFI - Successfully converted to Speeduino EFI
http://speeduino.com/forum/viewtopic.php?f=19&t=703
http://speeduino.com/forum/viewtopic.php?f=19&t=703