Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any strange behaviour, crashing issues etc, post them here! Problems compiling the firmware should go in the General support section rather than here
By theonewithin
#48701
As above.

Not going to be a firmware bug.

Will most likely be a hardware issue (wiring, sensor or faulty Speeduino/Arduino).

One other possibility is corrupted firmware.

You could do an eeprom clear and reload firmware then base tune then re-enter all your settings.
By Marius222
#48716
Today I checked the wiring and tested the sensor, everything is fine.
How do I reload the firmware?
I tried speedyloader ant installed downgrade and no luck for me
By theonewithin
#48737
Once again as above.

You need to find and fix your actual problem.

Do you have a spare Arduino you can test?

Or some random resistors you can put in place of your sensor to see the result?
EMI while cranking

Yeah, it doesn't totally rid the problem...dependi[…]

… do I understand it correctly that the in[…]

Наш центр специализируется на современных методах […]

Наш центр специализируется на современных методах […]

Still can't find what you're looking for?