Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For anything related to the 'official' Speeduino boards (Eg v0.3, v0.4 etc)
User avatar
By FedericoVivori
#48624
Hello everyone
I am looking for information to adapt an iac stepper valve for idle control with a drv8825 driver. I have a speeduino v0.3.6 board
Could someone guide me to solve my problem?
Thanks
User avatar
By PSIG
#48649
FedericoVivori wrote:
Thu Feb 25, 2021 8:55 pm
I am looking for information to adapt an iac stepper valve for idle control with a drv8825 driver.
The DRV+ULN board is an adapter for DRV driver plus 4x 1A outputs. If you don't need the additional outputs, then the thread will give you the info you need to run just the DRV.
Boost By Gear

well good to know , I haven't seen it on github or[…]

what I can't understand is what you mean by &quo[…]

In a general sense, the reliability of things like[…]

As far as I know all NA 1.8's are sequential. Does[…]

Still can't find what you're looking for?