Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
By thetoivonen
#41855
thetoivonen wrote:
Wed Mar 11, 2020 10:06 pm
Do you know if the 'Idle 2' pin is just an inverted copy of the signal to the 'Idle 1' pin?
Found out the answer to this is yes:
Code: Select all
if(configPage6.iacChannels == 1) { *idle2_pin_port |= (idle2_pin_mask); } //If 2 idle channels are in use, flip idle2 to be the opposite of idle1
idle.ino, line 515 in the 202002 release
By thetoivonen
#44738
Big update! Design documents are ready for review. I am going to sit on these for a couple days and spend some time looking for errors, then send to China for prototyping.
Attachments
(32.92 KiB) Downloaded 28 times
(93.6 KiB) Downloaded 31 times
(18.18 KiB) Downloaded 33 times
(90.85 KiB) Downloaded 31 times
(56.89 KiB) Downloaded 32 times
By thetoivonen
#46113
Protoypes have arrived!
Attachments
43149a76e30372ba338d6301c1ea74f637a5f988-14.jpg
43149a76e30372ba338d6301c1ea74f637a5f988-14.jpg (118.61 KiB) Viewed 171 times
Honda B16A2 Trigger patterns

Thanks for the input guys... All of these waveform[…]

2CV 602 flat twin

@Edce You should really start your own project. :)[…]

if it has a CH340 USB chip, try a short USB cabl[…]

Subaru hard start

You need to post your tune and a log during issue […]

Still can't find what you're looking for?