- Sun Oct 25, 2020 5:44 pm
#46044
Hi.
Am trying to run ducati 848 2012 with 8-1 triger rotor. Is an L twin engine. The problem is vr signal look like reading unsteady because when cranking it seems the rhe triger 8-1 its not spining equal..when come to compresion stroke become slow. The cranking rpm around 200rpm.
Did try to take out the trigger wheel and make a test on the small dc motor and work find on the composite logger on 200-500rpm. But when i put back the engine and crank its shows no good reading . I assume this happen due to slow cranking on compression stroke. But does anyone any idea for better solution. The starter motor is good. Will upload some video so anyone can share idea how to solve this problem
Sory bad english..is nit my morher language..
Am trying to run ducati 848 2012 with 8-1 triger rotor. Is an L twin engine. The problem is vr signal look like reading unsteady because when cranking it seems the rhe triger 8-1 its not spining equal..when come to compresion stroke become slow. The cranking rpm around 200rpm.
Did try to take out the trigger wheel and make a test on the small dc motor and work find on the composite logger on 200-500rpm. But when i put back the engine and crank its shows no good reading . I assume this happen due to slow cranking on compression stroke. But does anyone any idea for better solution. The starter motor is good. Will upload some video so anyone can share idea how to solve this problem
Sory bad english..is nit my morher language..