- Wed Oct 21, 2020 12:56 pm
#45983
Hi, I have a 1989 TOYOTA Hilux 22RE 2.4 L (2366cc) 4WD, EFI injection, (not california version , lambda sensor only pre catalytic converter) I've rebuilt it from new engine personally. I've Factory Service Manual with all detailed specs, I know the system very well, and the only thing i need to use speeduino is a crank position sensor, I've sow various solution as a circle teeth appliable on the main pulley of the main rod, on oem there is a sign to indicate the TDC advance settings. Other need sensor is the air temp intake sensor and barometric sensor (i think).
All other sensor are on the stock system, Mass Air Flow meter, tps on the throttle body, lambda sensor, coolant temp, oil temp, injector wire control.
My project is to convert to Coil on plug system, but i dont know from or how start it.
My interest in speeduino is for precision control of air fuel ratio and in future to swap the system adding a TURBO.
Another issue is how I can connect the OEM wire harness to Speeduino? There is plastic connector can help to do this.
Thank You for help.
What type of speeduino board I need? I think the last ?
Nick
All other sensor are on the stock system, Mass Air Flow meter, tps on the throttle body, lambda sensor, coolant temp, oil temp, injector wire control.
My project is to convert to Coil on plug system, but i dont know from or how start it.
My interest in speeduino is for precision control of air fuel ratio and in future to swap the system adding a TURBO.
Another issue is how I can connect the OEM wire harness to Speeduino? There is plastic connector can help to do this.
Thank You for help.
What type of speeduino board I need? I think the last ?
Nick