- Sat Oct 17, 2020 4:01 pm
#45921
Brand new to Speeduino project. I have assembled the board from scratch and am pretty sure I have everything in the correct place. Have a second Arduino Mega2560 setup with Ardu-Stim. Modded the code to work with the Mega and changed the default wheel and cam. Also set the default RPM to 700 instead of 6000.... selected a 36-1 wheel with the F3 cam signal. Only using the 36-1 signal at pin 53 on the Simulator Mega feeding it to pin 25 on Speeduino board. As soon as I plug in the USB to the Speeduino Mega all 4 LED's come on and stay on... Same happens when I connect 12V to the board direct.... Anybody else had this problem, it is obviously a build error on my part just hoping it is something stupid like a diode the wrong way round or some other stupidity on my part.