- Sun Oct 18, 2020 7:36 pm
An important thing to remember is to set the ardustim to a low RPM. If it is set too high when posting up( much more than typical cranking) then speedy will just ignore it thinking it's an error.
If you plan on testing sequential then you must setup accordingly, so you need the can trigger in too and adjust the settings on TS.
Lastly please post some logs and your tune on here as otherwise we are working blind.
Quantum Coupe with V04 on Ford 1.4CVH,Quantum 2+2 with Custom V04 on Jaguar 3.0l AJ30 V6
mini GPIO :done More soon
CANbus broadcast interface: done
Simple sd logger :done
External CAN io: Inputs :done
Gearbox controller: working