Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any discussion not specifically related to your project
#45913
Hi,

I have the 1.8 VVT engine of my MX5 nearly running, but now the cam sensor broke off. I dropped a wrench on it... It only costs a few bucks but my local parts shop tells me it takes 4 weeks to deliver. NOOOOOOO. I'm so close. I don't need fully sequential, how do I tell the Speeduino, via TunerStudio, to ignore the cam sensor? And should VVT still work, then? I think it should, as it is not closed loop.

Cheers,

Hugo
Trigger on Pick-up/Ignition

Use a coil trigger to feed RPM info to Speeduino. […]

Volvo 940 Turbo

So I have been thinking and testing some stuff out[…]

Water pump controller via boost port

That isn't supported in Speeduino. You will need […]

Board choice is very much a personal one although […]

Still can't find what you're looking for?