- Fri Aug 28, 2020 4:06 pm
#45072
Hi
I am having sync loss every tooth when cranking the motor, but when i rotate trigger wheel on lathe, there is no sync loss at all. I have tried many things. Disconnecting injectors and coils don't change anything. I dont understand what can cause this. I even made this new cover for new hall sensor ,so the sensor is far away from any surfaces other than trigger wheel
I have now nice laser cut trigger wheel that is 12-1.
I can get rpm and spark, and no sync losses, when i set the trigger wheel to be 12-3 on tuner studio, even it is actually 12-1. This seems weird to me. And trigger wheel and sensor on the lathe, it works with no sync losses, set to 12-1 on tuner studio. Like its supposed to. When i move the sensor on the bike, it does not work at all.
Here is picture of the thing on the bike.
I am having sync loss every tooth when cranking the motor, but when i rotate trigger wheel on lathe, there is no sync loss at all. I have tried many things. Disconnecting injectors and coils don't change anything. I dont understand what can cause this. I even made this new cover for new hall sensor ,so the sensor is far away from any surfaces other than trigger wheel
I have now nice laser cut trigger wheel that is 12-1.
I can get rpm and spark, and no sync losses, when i set the trigger wheel to be 12-3 on tuner studio, even it is actually 12-1. This seems weird to me. And trigger wheel and sensor on the lathe, it works with no sync losses, set to 12-1 on tuner studio. Like its supposed to. When i move the sensor on the bike, it does not work at all.
Here is picture of the thing on the bike.
Attachments
IMG_20200828_182817[1].jpg (2.23 MiB) Viewed 6358 times