Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Any questions you have before you begin buying, building and installing.
By theonewithin
#44601
Pddy95 wrote:
Wed Aug 05, 2020 5:41 pm
@theonewithin Gpio Mini or dxcontroller I mean.

So if I wire one of the unused arduino Pins to the proto area or an external Board I could use them, when I define the function in tunerstudio? Ground something between x rpm and y rpm if coolant temp is above z as example?
No.

It's not available as aditional inputs to do things like that currently.
By dazq
#44608
Pddy95 wrote:
Thu Aug 06, 2020 9:33 am
Ok, that means, I will need an external mega to get more GPIO's, 'cause Software is at the moment limiting. Right?
Yes that is correct , speedy doesn't have the programmable output support you are looking to use, so yes a second mega with gpio is an option until then.
Coils getting hot

can you share your tune? is overdwell turned off?

Hi, it was this thread, 'https://speeduino.com/for[…]

Trigger on Pick-up/Ignition

Hi, I`ve bought the Speeduino v0.4.3c with condit[…]

3 cylinder 2 stroke controller

So looking at my need for water pump and fan contr[…]

Still can't find what you're looking for?