Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
Help with building your Speeduino, installing it, getting it to run etc.
So after playing around with ignition settings I changed "wasted spark" to "wasted spark cop" and now it starts right up and is firing on all cylinders.

The problem is i am still using stock coil packs not a COP setup. I tested each cylinder with an induction tester and every cylinder is firing.

Would it be a problem running it this way? Could it be that the previous owner of the speedy built the speedy for COPs?

It seem like no one is using it yet. So you should[…]

Yeah I think it needs one squirt at 0 and the othe[…]

@ MegaTun, Sorry for the late reply. For private r[…]

Lycoming IO-320 Project

Thanks! I have a Speeduino Teensy 3.5 8x8, I thin[…]

Still can't find what you're looking for?