- Wed Jun 10, 2020 2:08 pm
#43547
SCG-ECU 2.0 - work in progress !!!
New design + many new features. Mainboard with Teensy 3.5 (like before) + expansion shield.
---------------------------
Mainboard features:
- 2x O2 sensot input (narrow band)
- TPS input
- coolant sensor input
- oil sensor input
- clutch switch input (launch controll)
- external map sensor input
- 4x active coils output
- 4x injectors output
- 8x 3A PWM outputs (boost, idle, fan, fuel pump, VVT, etc.)
- AEC-Q100 compilant
- two 5V linear regulatora (internal logic and external for sensors)
- 3V3 linear regulator
- reverse polarity protection
- CAN-BUS
- new Infineon drivers for injectors and other PWM outs (designed special for automotive)
- 2x VR or hall sensor input
- stepper driver
----------------------------------
Expansion shield features:
- 4x active coils output (now we have 8 outs sequential)
- 4x injectors output (now we have 8 outs sequential)
- proto area
- 2x WBO2 inputs (two wideband oxygen) with 2 additional cooprocesors and LCD inputs to see live data from WBO2
- 2x VR or hall sensor input (now we have 4 speed inputs)
2x WBO2 based on opensource SLC2
New design + many new features. Mainboard with Teensy 3.5 (like before) + expansion shield.
---------------------------
Mainboard features:
- 2x O2 sensot input (narrow band)
- TPS input
- coolant sensor input
- oil sensor input
- clutch switch input (launch controll)
- external map sensor input
- 4x active coils output
- 4x injectors output
- 8x 3A PWM outputs (boost, idle, fan, fuel pump, VVT, etc.)
- AEC-Q100 compilant
- two 5V linear regulatora (internal logic and external for sensors)
- 3V3 linear regulator
- reverse polarity protection
- CAN-BUS
- new Infineon drivers for injectors and other PWM outs (designed special for automotive)
- 2x VR or hall sensor input
- stepper driver
----------------------------------
Expansion shield features:
- 4x active coils output (now we have 8 outs sequential)
- 4x injectors output (now we have 8 outs sequential)
- proto area
- 2x WBO2 inputs (two wideband oxygen) with 2 additional cooprocesors and LCD inputs to see live data from WBO2
- 2x VR or hall sensor input (now we have 4 speed inputs)
2x WBO2 based on opensource SLC2
Attachments
1.png (502.71 KiB) Viewed 6852 times