For any discussion not specifically related to your project
User avatar
By JochemsTR
#44025
Hello,
question:
Speeduino Wiki states
"Note: The above example uses 'smart' coils with built in igniters. Do NOT attach high current (dumb) coils without adding an igniter"

I have a 6-coil wasted spark with build in amplifiers (ZSE004)....
Is the context "igniter" same as the context "amplifier" ?

If I opt to choose 6-coil wasted spark without amplifier, which igniter module do you recommend?
Jochem
Attachments
ZSE004.JPG
ZSE004.JPG (25.57 KiB) Viewed 4466 times
User avatar
By PSIG
#44028
JochemsTR wrote: Thu Jul 02, 2020 12:57 pm Is the context "igniter" same as the context "amplifier" ?
Yes. Coil driver, amplifier, and igniter (ignitor) are a few terms that mean the same thing. See the image below or in the old Wiki, showing the coil driver between the Speeduino and the coil. A "smart" coil is simply a dumb coil with a driver built on-to or into the coil.
JochemsTR wrote: Thu Jul 02, 2020 12:57 pmIf I opt to choose 6-coil wasted spark without amplifier, which igniter module do you recommend?
There are many, many choices. Do a search for those coil driver terms here on the forums for some examples of 1 to 4-channel drivers. A popular one is to use 3 of the 4 channels in the inexpensive "Bosch 211" driver module. Under $10 online using part numbers 0 227 100 211, 851 54011 102, 4D0 905 351, etc. If you are extremely budget-limited, you can solder and heat shrink wires directly to the module terminals to skip those connectors. The result is a module with wire leads similar in function to the QuadSpark. Many options. 8-)

David


Image
By dazq
#44040
Just for extra help here are the diagrams for the 3ch (aka a "209" )and the 4ch (aka the "211")Bosch modules
Attachments
IMG_20200319_203937.jpg
IMG_20200319_203937.jpg (1.08 MiB) Viewed 4421 times
IMG_20200319_204145.jpg
IMG_20200319_204145.jpg (1014.76 KiB) Viewed 4421 times
By toddTR6
#45119
Hi Jochem,

Is your project a TR6?

What are you using for a crank trigger wheel and how are you mounting it?

Would love to see a photo.

Cheers

It looks like you have a fuel supply issue. readin[…]

Will this have an updated version about this featu[…]

Vr Conditioner Noise when cranking

I did the fix, but it's not work. I put my setti[…]

Perhaps some different points and pictures. Instr[…]

Still can't find what you're looking for?