- Sun Jun 21, 2020 1:51 pm
#43843
Hi guys I have a 1989 Plymouth Voyager minivan with a 2.5l sohc 4cyl that was turbocharged from the factory for 2 years. It has mpfi and runs batch from the factory. It also has a distributor and single external coil. Inside of the distributor is a trigger with 4 vanes on it and one has a hole in it. There are 2 hall sensors that read the veins. There was a setup before in tunerstudio specifically for these motors but I cant find it. I've attached the documents I've found for megasquirt when it was working. Any thoughts on the trigger settings? Should it be basic distributor? I also have a flexplate that will bolt up that has the later jeep 2002 / chrysler 3.3/3.8 trigger setup it was also used on the 2.5 jeep 4cyl.Thanks from michigan, usa
Attachments
FB_IMG_1590022407429.jpg (32.12 KiB) Viewed 4566 times
FB_IMG_1590022427081.jpg (45 KiB) Viewed 4566 times
FB_IMG_1590022441343.jpg (51.87 KiB) Viewed 4566 times
FB_IMG_1590022418167.jpg (32.24 KiB) Viewed 4566 times
FB_IMG_1590022395679.jpg (55.67 KiB) Viewed 4566 times