Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source - Page 21

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#40423

By dvjcodec - Sun Jan 19, 2020 7:59 pm

- Sun Jan 19, 2020 7:59 pm #40423

Almost done

New revision ECUTeen 3.5 (2019).
Gerbers --> https://github.com/dvjcodec/ECUTeen_3.5 ... 191123.rar
Schematic --> https://github.com/dvjcodec/ECUTeen_3.5 ... ematic.png
BOM --> https://github.com/dvjcodec/ECUTeen_3.5 ... C15%2B.rar

Attachments

IMG_20200119_204028.jpg (1023.67 KiB) Viewed 11373 times

IMG_20200119_204005.jpg (979.86 KiB) Viewed 11373 times

Github | Seaside Customs
ECUTeen 3.5 | SCG-ATC | SCG-ECU 1.0 8IGN/8INJ

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#41257

By crazyafrican - Mon Mar 02, 2020 2:06 am

- Mon Mar 02, 2020 2:06 am #41257

What's the status of the firmware for 8 cylinder sequential? Is it usable yet? I have a v8 that could use this

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#42072

By porelmundo - Tue Apr 14, 2020 10:50 pm

- Tue Apr 14, 2020 10:50 pm #42072

Can you share the SCG KiCad project files? I would like to test this design. Thank you

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#42082

By Mr_Hypnotic - Wed Apr 15, 2020 1:55 pm

- Wed Apr 15, 2020 1:55 pm #42082

porelmundo wrote: ↑Tue Apr 14, 2020 10:50 pm Can you share the SCG KiCad project files? I would like to test this design. Thank you

I think what you seek is here:
https://github.com/dvjcodec/ECU_Teen_3.5_rev.B

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#42126

By porelmundo - Sat Apr 18, 2020 12:09 am

- Sat Apr 18, 2020 12:09 am #42126

Thank you, what i need is to create a pick and place file for manufacturing, that is not there.
Thank you anyway

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#43025

By Holden202T - Fri May 22, 2020 12:54 pm

- Fri May 22, 2020 12:54 pm #43025

I tried to download the gerbers linked on the top of page 21 but the file i get says its not a valid rar file and nothing in it ?

No matter what the question is, the answer is always more horsepower!!

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN etc.#43113

By dvjcodec - Mon May 25, 2020 6:05 am

- Mon May 25, 2020 6:05 am #43113

Happy, happy day

Eagle sources (brd and sch) for SCG-ECU 1.0 and STM32 to Teensy adapter published in my Github.

https://github.com/dvjcodec/SCG-ECU-1.0

I hope, Speeduino will support this board official in firmware, 8 outs.

Github | Seaside Customs
ECUTeen 3.5 | SCG-ATC | SCG-ECU 1.0 8IGN/8INJ

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source#43119

By Holden202T - Mon May 25, 2020 10:51 am

- Mon May 25, 2020 10:51 am #43119

is it just me or are other people getting error saying its not a valid archive file ?

No matter what the question is, the answer is always more horsepower!!

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source#43140

By Holden202T - Mon May 25, 2020 9:54 pm

- Mon May 25, 2020 9:54 pm #43140

it was just me, i must have had a too old of a version of zip/rar once i got the latest i was able to open them!

No matter what the question is, the answer is always more horsepower!!

Re: Speeduino + Teensy 3.5 - ECUTeen3.5 - 8INJ/8IGN/CAN - Open Source#43153

By subzero - Tue May 26, 2020 3:20 pm

- Tue May 26, 2020 3:20 pm #43153

ordered pccc fot ecuteen 3.5 A
how tomopen bom