Any questions you have before you begin buying, building and installing.
By theonewithin
#39205
The NO2C is what I run on my bike.

Should handle everything you need.

No point going a 4 injector model unless you think you may need staged injection for your project?
By LPG2CV
#39207
Oh! Should have said, trigger pattern and sensor first. If your sensor is VR, then you will need a conditioner.

But you will know this, because you've read the wiki. :D
By Fatalan
#39222
Well, I ordered a "full sized" one. I spent so long debating and procrastinating I flipped a coin. I know thats not the greatest way to make life decisions but if I didnt do something I would have done nothing at all.

Thanks again! Details and questions will no doubt follow.

Always going to be one, I have completed 3 convers[…]

Do i have to do something in arduino software ? i […]

STM32 development

Not yet, I have been too busy to look into it but […]

Hola a todos Actualizo!!! Me es grato comunicaros[…]

Still can't find what you're looking for?