- Sat May 12, 2018 2:59 pm
#26081
It would be most useful to use either a custom MAF or a singular brand-specific MAF sensor with speeduino. It would speed up the adaptation tables and quicken the tuning process considerably. I can invade my gm ecm to pull up the lookup table for the MAF sensor to provide enough information to be of use in a feedback loop if an oxygen sensor cannot be installed (such as a marine application where the manifold is flooded with water to keep it cool).
This would help things along considerably for those applications without an oxygen sensor for feedback. I will see what I can dig up in terms of a MAF lookup table (frequency vs Grams per second). An interpolation formula will have to be implemented to fill the gaps, but I hope it won't slow down the system)
This would help things along considerably for those applications without an oxygen sensor for feedback. I will see what I can dig up in terms of a MAF lookup table (frequency vs Grams per second). An interpolation formula will have to be implemented to fill the gaps, but I hope it won't slow down the system)