Mitshubishi 4-1 cam trigger need to config

Mitshubishi 4-1 cam trigger need to config#39067

By Prabuddhitha - Sat Nov 16, 2019 9:41 am

- Sat Nov 16, 2019 9:41 am #39067

Hlw i have 4g63 non turbo engine and im using vw smart coil waste spark it have cam decoder 4 teeth and 1 teeth signal how can i config it

Attachments

1DDECCEF-7919-45E2-86E5-DDD7579A4053.jpeg (1.81 MiB) Viewed 23110 times

C13F5CE0-5A82-48A5-A826-9770A5A6C328.jpeg (2.13 MiB) Viewed 23110 times

Re: Mitshubishi 4-1 cam trigger need to config#39096

By mattsabun - Mon Nov 18, 2019 4:24 am

- Mon Nov 18, 2019 4:24 am #39096

Just use that 4g63 decoder to run mitsu 4/1 cas. Mine is always running good.

Re: Mitshubishi 4-1 cam trigger need to config#62394

By Wombat - Mon Apr 10, 2023 3:34 am

- Mon Apr 10, 2023 3:34 am #62394

Those are very good, albiet low resolution, they provide a solid stable signal. On the downside they are expensive to replace but are one of the Best OEM cam mount solutions for any 4 cylinder engine. I machined one down to suit my Honda...

Former/ semi current Megasquirter and Honda B series Junkie and Open source EFI enthusiast

Re: Mitshubishi 4-1 cam trigger need to config#63598

By JHolland - Wed Jun 21, 2023 9:29 am

- Wed Jun 21, 2023 9:29 am #63598

What is the part number of that distributor?