Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
By UKTCHunter
Hello community,

i am from Bulgaria and in the process of building speeduino v0.3.7 board and VR conditioner.
I have contacted a local PCB manufacturing plant and produced one sample v0.3.7 board that looks good on first site, if somebody is interested after the first tooling fee a board can be produced for around 30BGN (16USD).

I am wondering if there are people interested in VR boards, bare or assembled in the Balkans. The thing is that probably i am gonna produce 25 boards (the minimum panel area in the plant).
The price for a bare board will be around 5BGN (2.7USD).
If there is interest i will come up with a price for assembled boards.

Thank you for the good work on the project.
Wish you all well.

Eeprom-clear? Its a "firmware" you can[…]

No its the 6 pin connector at the left slck, mosi[…]

No there are no "official " interface bo[…]

EVAP purge programming

AFR target >14 and RPM <4000 was my first ro[…]

Still can't find what you're looking for?