Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
By soultron
Ended up getting another unit before it was installed and I don't need both.
DetonationEMS v1.2a
PXL_20210430_195855122.jpg (2.13 MiB) Viewed 4586 times
Bluetooth dongle, USB and ribbon cables, and harness breakouts all included.

Eeprom-clear? Its a "firmware" you can[…]

No its the 6 pin connector at the left slck, mosi[…]

No there are no "official " interface bo[…]

EVAP purge programming

AFR target >14 and RPM <4000 was my first ro[…]

Still can't find what you're looking for?