- Sat Jul 04, 2020 10:39 pm
#44077
I guess this is particularly interesting for the folks located in Europe.
For sale are 2 UA4C boards. They are new, tested and assembled as in the photo.
These are not by WTMtronics but use the same components. I made 5 of them and these are left.
The connectors come with a 30 cm (12 inch) pigtail harness, so that no special crimp tool is required.
I include 2 pressure transducers (250 kPa) but they are not soldered to the board in case your build already has an external MAP sensor.
Arduino not included
UA4C board 150 €
Hammond case 20 €
+ shipping depending on your location. I am located in 44627 Germany.
For sale are 2 UA4C boards. They are new, tested and assembled as in the photo.
These are not by WTMtronics but use the same components. I made 5 of them and these are left.
The connectors come with a 30 cm (12 inch) pigtail harness, so that no special crimp tool is required.
I include 2 pressure transducers (250 kPa) but they are not soldered to the board in case your build already has an external MAP sensor.
Arduino not included

UA4C board 150 €
Hammond case 20 €
+ shipping depending on your location. I am located in 44627 Germany.