[noisymime]

I have a few old v0.2 boards plus the bad v0.3.2 boards that arrived going begging if anyone wants them.

The v0.2 was a bit of a limited version of the v0.3 and had some ideas that turned out to be non-starters, but the boards may be useful if you know what you're doing.

The 'bad' v0.3.2 boards were the ones that I stuffed up and incorrectly placed a copper fill on that didn't connect the grounds. Technically these can be made to work if you're willing to solder up each ground point to the copper fill, but it's a non-trivial amount of work. I stress that these boards will no function correctly as is.

Free to anyone who who wants to pay postage on them.

[maxs14]

I purchased a PCB 0.4 if you have not yet shipped, could care a 0.2
Thank you

[edc_atl]

I have a few (7 pcs) ver 0.3 boards with the missing ground scenario as well. They can be included free of charge with your order for the asking.

[maxs14]

ok, one pcb, thanks

[peter351]

Hello , I would like to purchase Version 0.4 board(s) and associated components if anybody could help, been reading on this forum for days to no avail. I'm located in Sunshine 3020 Melbourne Victoria Australia any help would be greatly appreciated.

I can not find a PM function on the forum to make contact with individuals, its seems they don't exist.

Have several projects i would like to start ASAP as Christmas is approaching.

So for my request I have decided to post in this thread. Thank you.

Cya

[Hasse.69]

@ Peter351 welcome to forum.
Link to store:
https://speeduino.com/shop/index.php

Good luck , Hasse.

[westernholden]

Hi noisymime

I would be interested in trying out a 0.2 board and a 3.x board for postage. Would be interesting to try until the next batch of 3.2 boards become available from you (any idea when that will be?)

I'm also interested in the 0.5 boards whenever they become available (probably getting way ahead of myself), as i understand the 0.4 boards are just the 3.2 boards with a different connector.

Wanting to try the boards out in a 186 holden with a black efi head.

If possible please PM me for my address and payment details, I live in WA so postage shouldn't be too bad

Cheers

[peter351]

@ Peter351 welcome to forum.
Link to store:
https://speeduino.com/shop/index.php

Good luck , Hasse.

Thank you Hasse.69 , i was hoping to pickup direct of noisymime as we live in the same state ( Victoria ).

Just out of curiosity is it possible to PM people on this forum ? as I cannot seem to find that feature on this forum????

Bye

[noisymime]

@ Peter351 welcome to forum.
Link to store:
https://speeduino.com/shop/index.php

Good luck , Hasse.

Thank you Hasse.69 , i was hoping to pickup direct of noisymime as we live in the same state ( Victoria ).

Just out of curiosity is it possible to PM people on this forum ? as I cannot seem to find that feature on this forum????

Bye

Hey Peter, I go through Sunshine every day on the train to work

I don't have any more v0.4 boards and don't plan on having any produced at this stage (See other threads about how the v0.4 was really a testing board only). I do have a heap of the new v0.3.2 boards though (See http://speeduino.com/wiki/index.php/V0.3.2), would one of them work for you?

[peter351]

Hello noisymime , Thank you for the reply, I not up to speed on what is the latest board in speeduino , I have be reading from the start of this forum threads and just randomly jumping all over the place , maybe i should systematically read in some order from top to bottom.

I will settle for Version V0.3.2 boards then if possible the link you posted for the V0.3.2 baords http://speeduino.com/wiki/index.php/V0.3.2

Cya