- Wed Jan 24, 2018 4:52 am
#23835
Hi All,
Not sure if this is the correct place. but hopefully someone can shed some wisdom on this.
I am trying to diagnose a VR trigger issue, I'm currently running duel wheel, with two pickups. The crank signal is clean and as I would expect. but I am not able to over lay the cam signal. And I can not find out how to add this to the data capture/trace. If I could do this Im sure it would show my problem.
See below I have the Crank signal and it looks good to me. 24 pulses (cam wheel) you can see the compression strokes every 4 pulses, and the slight speed changes.
download/file.php?mode=view&id=2844
Now only to see the Cam (reset/sync pulses)
Im using a registered version of TS.
Thanks in advance
StuM
Not sure if this is the correct place. but hopefully someone can shed some wisdom on this.
I am trying to diagnose a VR trigger issue, I'm currently running duel wheel, with two pickups. The crank signal is clean and as I would expect. but I am not able to over lay the cam signal. And I can not find out how to add this to the data capture/trace. If I could do this Im sure it would show my problem.
See below I have the Crank signal and it looks good to me. 24 pulses (cam wheel) you can see the compression strokes every 4 pulses, and the slight speed changes.
download/file.php?mode=view&id=2844
Now only to see the Cam (reset/sync pulses)
Im using a registered version of TS.
Thanks in advance
StuM
Attachments
Add description
20180124_173737.jpg (3.95 MiB) Viewed 4998 times
20180124_173737.jpg (3.95 MiB) Viewed 4998 times