For any pieces of hardware directly related to Speeduino (ie Boards, components etc)
By stum
#23835
Hi All,

Not sure if this is the correct place. but hopefully someone can shed some wisdom on this.

I am trying to diagnose a VR trigger issue, I'm currently running duel wheel, with two pickups. The crank signal is clean and as I would expect. but I am not able to over lay the cam signal. And I can not find out how to add this to the data capture/trace. If I could do this Im sure it would show my problem.

See below I have the Crank signal and it looks good to me. 24 pulses (cam wheel) you can see the compression strokes every 4 pulses, and the slight speed changes.
download/file.php?mode=view&id=2844
Now only to see the Cam (reset/sync pulses)

Im using a registered version of TS.

Thanks in advance

StuM
Attachments
Add description
Add description
20180124_173737.jpg (3.95 MiB) Viewed 4986 times

Hi, I am trying to assign Signed values to the x-a[…]

Vr Conditioner Noise when cranking

New version 202305 don't fix the issue. Now after[…]

blitzbox

I've finally figured out why MAP and Lambda weren'[…]

Hello, I bring news!! Let me tell you that after […]

Still can't find what you're looking for?