For any discussion not specifically related to your project
By riclopes
#59497
Good morning, how are you?
I have a 2003 Suzuki 50hp 4stroke outboard and I can't start it. Zero changed the cranking, wsu and ase settings. I use 1.8t audi drive because my coil didn't have a drive. Nozzles have signal, fuel pump works, spark plugs. I did the calculation of the adtc and it seems correct (because once in the past I managed to make it work). Yesterday it still turned on it worked a little but it doesn't pick up anymore. Attached my log, thanks for help


https://www.mediafire.com/file/t9mnsgdz ... s.mlg/file
User avatar
By PSIG
#59773
Good evening, I'm fine, thanks! Please post the exact tune used to take the log. Placing both the tune and logs in a ZIP file makes it easy to match them up. 8-)

Thank you. Ill try as soon as I can. These setti[…]

BMW E23 M30B28

cps.PNG With the crank at TDC, rotation is clo[…]

Had it running for a short period again. Same as […]

Ok, here is the first version of the adapter plate[…]

Still can't find what you're looking for?