[Kalns]

I`ll get that in an hour or so, when i`ll get timing light to test it..

[Kalns]

Here is the tune and log file, while trying few trigger settings...
change log extension to mlg

[jonbill]

Are you cranking it in that log?
there's no RPM, so if it is, it's not detecting the trigger pattern.
Also the MAP has stayed up near 100 with TPS=0, so if that's cranking it's got a huge air leak!

[Kalns]

in the morning when i tried first time, it showed 200-300 rpm but not when i was logging. physicaly nothing has changed, swaped back to oem ecu and it started right up with 0 problems.

how can i verify if crank vr sensor is connected corectly and signal is not reverse ?

[jonbill]

record a tooth log should show something