- Sun May 09, 2021 7:04 pm
#50184
This has driven me nuts for days maybe longer...running speeduino 202103 firmware on a custom sheild, trying to add an auxillary input channel to display voltage on A7. Using AUX Input 0.
It would seem that the only way speedy reports the voltages or possibly even measures the voltages is to have A3 enabled and read into any other Aux gauge.
As a work around I have A3 enabled into AUX Input 15, and then using A7 as intended.
Tried many combinations of Analog Ax into AUX Input XX and the only one that seems to help me is A3 into any Aux input.
Am I going nuts? Is this a known bug or something corrupt in my setups?..tried 2 diff ECU same design same problemo.
I assume someone else out there is using this feature but didn't seem much using search in this forum.
Plaz
It would seem that the only way speedy reports the voltages or possibly even measures the voltages is to have A3 enabled and read into any other Aux gauge.
As a work around I have A3 enabled into AUX Input 15, and then using A7 as intended.
Tried many combinations of Analog Ax into AUX Input XX and the only one that seems to help me is A3 into any Aux input.
Am I going nuts? Is this a known bug or something corrupt in my setups?..tried 2 diff ECU same design same problemo.
I assume someone else out there is using this feature but didn't seem much using search in this forum.
Plaz