- Thu Apr 15, 2021 4:14 pm
#49651
I'm running a 48 pin PNP on a 1994 1.8 and one of the first problems I've encountered is the cooling fan does not turn on. On this model year the relay is wired to pin 1L on the ecu connector.
I have it set to the board default in tuner studio but nothing happens. I'm guessing I either need to change the pin in software or open up the case and run a jumper wire from one of the analog pins to pin 1L on the connector but I don't know which.
The wiki makes no mention of this and I didn't find any solution searching the forums.
I have it set to the board default in tuner studio but nothing happens. I'm guessing I either need to change the pin in software or open up the case and run a jumper wire from one of the analog pins to pin 1L on the connector but I don't know which.
The wiki makes no mention of this and I didn't find any solution searching the forums.