Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any discussion not specifically related to your project
By dener0987
#49556
Hey guys

I am in doubt of how to connect and configure a second bank of injectors for a 4-cylinder engine.
By dener0987
#49565
jonbill wrote:
Mon Apr 12, 2021 7:26 am
there's a section on staged injection in the wiki.
Yes, I had already seen this topic on the wiki, but my doubt is regarding the wiring of the injectors. In which channels do I connect the injectors? And the layout of the injectors I configure as semi-sequential or paired?
Long post warning....

The issue of calculating accurate timing with a lo[…]

The m44 cam trigger wheel doesn't work with spee[…]

Project Yamaha fzr 400rr injector

Once again... The last few version of firmware ha[…]

Squirts per cycle whatever works best.

Still can't find what you're looking for?