Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any discussion not specifically related to your project
By joey120373
Quick question, I putting together a board for JLPCBs Assembly service. Just want to try it out. And, though I think it’s an error, all of a sudden their stock of ATMega2560s went from a whole bunch down to 1 in stock. So that means my board won’t get populated.

They have plenty on the ATmega1280s with the same footprint. So I was wondering if the current code will load and run on the 1280?


Hi Adam, I have an MX5 NB 1.6l from 98 should be […]

This is the current tune file....need to rename to[…]

Weird TPS+voltage problem

My first instinct is its wired incorrectly. Also a[…]

Wired as you told and I started the test mode. Has[…]

Still can't find what you're looking for?