Speeduino is now on Github Sponsors (Rather than Patreon): https://github.com/sponsors/noisymime
For any discussion not specifically related to your project
#45913
Hi,

I have the 1.8 VVT engine of my MX5 nearly running, but now the cam sensor broke off. I dropped a wrench on it... It only costs a few bucks but my local parts shop tells me it takes 4 weeks to deliver. NOOOOOOO. I'm so close. I don't need fully sequential, how do I tell the Speeduino, via TunerStudio, to ignore the cam sensor? And should VVT still work, then? I think it should, as it is not closed loop.

Cheers,

Hugo

I'm also working on installing my 0.4 into my 97 m[…]

Water pump controller via boost port

Simplest option would be a separate controller tha[…]

ATmega2560 vs ATMega1280

Unlikely... It has half the flash space as the 25[…]

Question about sensor groud

There is only 1 ground in Speeduino designs genera[…]

Still can't find what you're looking for?