- Sun Aug 16, 2020 11:37 am
#44749
Hi,
I am in the middle of wiring my 0.4 board to an MX5 VVT in an NB1, with weird wiring. But I won't bother you with those details, but I would like a running signal to check / control some things. Can Speeduino set a pin high when running, not cranking? My other option is a simple power voltage measurement, when above 12,5V the alternator is charging, so the engine is running (my alternator is switched off under cranking). But a simple pin on the Speeduino would be nice.
Thanks,
Hugo
I am in the middle of wiring my 0.4 board to an MX5 VVT in an NB1, with weird wiring. But I won't bother you with those details, but I would like a running signal to check / control some things. Can Speeduino set a pin high when running, not cranking? My other option is a simple power voltage measurement, when above 12,5V the alternator is charging, so the engine is running (my alternator is switched off under cranking). But a simple pin on the Speeduino would be nice.
Thanks,
Hugo